INSTALLATION
aSSemBLInG THe CLamP-WIre
Clamp-Wire
attach the clamp-wire to the unit as shown, and then run the cables through the clamp-wire to keep them neat.
moUnTInG THe CoVer-feeT
(4 ea) onTo THe SUBWoofer
1
2
3
1. Place a Cover-foot on each of the 4 holes in the bottom of the woofer as shown in the illustration.
2. Insert a Screw-taptite into each the hole in each Cover-foot and tighten.
3. attach a foot Rubber to each Cover-foot.
16