Programming Track Numbers - Philips AZ 1060 Handbuch

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during
playback. The play modes can also be combined with PROGRAM.
SHUFFLE - tracks of the entire CD/ programme are played in
random order
SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme
REPEAT ALL - repeats the entire CD/ programme
REPEAT - plays the current track continuously
1. To select your play mode, press the MODE button before or
during playback until the display shows the desired function.
2. Press PLAY•PAUSE 2; to start playback if in the STOP
position.
3. To return to normal playback, press the respective MODE
button until the various SHUFFLE/ REPEAT modes are no longer
displayed.
– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your CD tracks
in the desired sequence. If you like, store any track more than
once. Up to 20 tracks can be stored in the memory.
1. Use the SEARCH ∞ or § to select your desired track number.
2. Press PROG.
™ Display:
and the selected track number
PROGRAM
appears briefly.
™ If you attempt to programme without first selecting a track
number,
3. Repeat steps 1-2 to select and store all desired tracks.
™
is displayed if you attempt to programme more than
20 tracks.
4. To start playback of your CD programme, press PLAY•PAUSE
2;.
Reviewing the programme
In the stop position, press and hold down PROG for a while until
the display shows all your stored track numbers in sequence.
continuously in random order
is shown.
CD PLAYER
PROGRAM
9