Functional Description; Intended Use; Product Features - Bosch PSB 530 RA Originalbetriebsanleitung

OBJ_BUCH-379-003.book Page 19 Monday, October 5, 2009 9:57 AM
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal and plastic. Machines with elec-
tronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck
2 Spindle lock button(PSB 600 RE/
PSB 650 RE/PSB 650 RA)
3 "Drilling/Impact Drilling" selector switch
4 Rotation direction indicator(PSB 600 RE/
PSB 650 RE/PSB 650 RA)
5 Lock-on button for On/Off switch
Bosch Power Tools
6 On/Off switch
7 Thumbwheel for speed preselection
(PSB 600 RE/PSB 650 RE/PSB 650 RA)
8 Rotational direction switch
9 Extraction device with dust collector and
depth stop *
10 Wing bolt for adjustment of auxiliary handle *
11 Auxiliary handle (insulated gripping surface) *
12 Telescopic guide with depth stop scale *
13 Set collar for depth stop*
14 Release button for dust collector *
15 Dust collector*
16 Handle (insulated gripping surface)
17 Dust protection ring*
18 Locking latch for dust collector*
19 Release button for extraction device *
20 Filter element (micro filtersystem) *
21 Level indicator of the dust collector *
22 Depth stop*
23 Button for depth stop adjustment *
24 Universal bit holder*
25 Screwdriver bit*
26 Front sleeve
27 Rear sleeve
28 Allen key **
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
**Commercially available (not included in the deliv-
ery scope)
2 609 004 192 | (5.10.09)
English | 19