General Safety Rules - Makita 6017D Betriebsanleitung

ENGLISH
1. Set plate
2. Battery cartridge
3. Switch trigger
4. Reversing switch lever
5. Low speed
SPECIFICATIONS
Model
Capacities
-1
No load speed (min )
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
Explanation of general view
6. High speed
7. Speed change lever
8. Pointer
9. Weak
10. Strong
Steel
Wood
Wood screw
Machine screw
High
Low
11. Torque adjusting ring
12. Tighten
13. Sleeve
14. Ring
6017D
5.1 mm x 35 mm
---
600
200
251 mm
1.0 kg
D.C. 7.2 V

GENERAL SAFETY RULES

WARNING:
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or seri-
ous injury. The term "power tool" in all of the warnings
listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electric shock if
your body is earthed or grounded.
6018D
10 mm
15 mm
---
0 - 600
0 - 200
1.1 kg
6019D
6 mm
0 - 600
0 - 200
251 mm
1.1 kg
GEA002-3
3