Husqvarna 320W Mono Installationsanleitung Seite 8

Lorem
The brackets must be attached to the enclosure before assembling them to
the ground mount.
Attach (x4) Part into the (x4) threaded holes on
the back of the enclosure using the (x4) phillips head
bolts, tighten down securely.
Use (x2) Part A (brackets) and slide horizontally through both sets of channel nuts at top & bottom.
Insert (x4) Part G into the holes on
the (x4) brackets then align the (x4) Part G
bolts horizontally and tighten.