Panasonic TX-24FS503E Hilfe Seite 402

– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with
2. Select the channel with
3. Set Manual Tuning.
4. Select Store and press
Use Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
■
DVB-via-IP (DVB-S)
Please consult the received satellite broadcasting companies for the
●
setting.
1. Select Transponder Frequency
FEC / Service ID
2. Select Start scan
■
DVB-via-IP (DVB-C)
1. Select Frequency
Service ID and set with
Normally set
●
2. Select Start scan
Numeric
Channel Up /
OK to set.
to make small adjustments to the tuning of an individual
/ Symbol Rate
and set with Cursor buttons
and press OK to search.
/ Bandwidth / Modulation Type
Cursor buttons
Symbol Rate to Auto.
and press OK to search.
- 99 -
buttons.
Down.
/ Polarisation
or Numeric
/ Symbol Rate
or Numeric buttons.
/ Modulation /
buttons.
/ FEC /