About Installing The Panels And Sealing Strips; To Install The Top Panel; To Install The Side Panels And Sealing Strips; Configuration - Daikin EKLN140A1 Installationsanleitung

4.7 About installing the panels and
sealing strips
4.7.1

To install the top panel

1 Position the top panel precisely over the 4 guide pins
(accessory M).
2 Fix the top panel with 4× M5 Torx screws (accessory A) ONLY.
INFORMATION
Tighten them hand-tight (tightening torque <5N∙m).
3 Fit the self-adhesive D-rubber (accessory P) to both edges of
the top panel.
4 Make sure the rubber is adhered flush with the outside of the
sheet metal plate edges.
INFORMATION
Dry and degrease the sheet metal plate with a neutral
cleaning agent to ensure that the D-rubber adheres
properly. Cut the rubber to length with scissors.
a
a Self-adhesive D-rubber (accessory P)
4.7.2 To install the side panels and sealing
strips
1 Affix the self-adhesive sealing strips to both sides of the outdoor
unit.
a
a Sealing strip, left. Affix this over the full height of the
outdoor unit (see dotted line).
b Sealing strip, right. Affix this over the length of the service
door ONLY (see dotted line).
2 Push the remainder of the sealing strip between the base frame
profile.
3 Lift the left and right side panels into the recess and let them
slide over the lower pins (accessory M).
EKLN140A1
Low sound enclosure
4P650154-1A – 2021.04
4 Press the side panels tight and lock them with the key provided
(accessory R).
Result: The low sound enclosure has been fitted.
5

Configuration

After installing the outdoor unit ALWAYS deactivate the high external
static pressure function. This in order to avoid increased fan velocity
and associated increase in outdoor unit sound emission.
Model
RZAG71
RZAG100
RZAG125
b
RZAG140
RZA200
RZA250
RXYSA4
RXYSA5
RXYSA6
INFORMATION
For more information on the field settings, see the installer
reference guide or the service manual of the outdoor unit.
5 Configuration
Setting Set to value...
2-79 2
2-18
Installation manual
9