Hama 00054682 Kurzanleitung Seite 6

4.4. Programming the additional keys
• Hold the relevant M key and "+" pressed until the four LEDs start to ash alternately.
• Now enter the individual key or key combination.
• To nish, press the relevant M key again.
• To delete the M keys, hold "+" and an M key pressed for one second (LEDs ash
slowly).
• Now press the M key you want to delete the setting from.
5. Care and maintenance
• Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
6. Turbo function
• The following action keys can be assigned a Turbo function: A/B/X/Y/L/R/L2/R2
• To assign the relevant key, press and hold the action key and Turbo key at the same
time.
• To remove the Turbo function, repeat the procedure.
• Your settings will be reset after an interruption to the connection.
4