Herunterladen Inhalt Inhalt Diese Seite drucken

Assembling And Adjustments; Driver's Cab; Intended Use; Attachment - Husqvarna BMH150 Bedienungsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Assembling and adjustments

Driver's cab

From his position inside the cab, the driver must
have a complete and unobstructed view of the
sweeper and of the area in front of the sweeper
It must be possible to maintain a free and
unobstructed view through the windscreen of the
cab.
The vehicle must be equipped with lights capable of
giving the driver an illuminated view of the Sweeper
and of the area in front of the Sweeper in darkness.
The vehicle to which the Sweeper is attached must
be equipped with headlights and revolving flashing
lights in accordance with national road traffic
regulations.
The vehicle must also be equipped with front
and rear position lights and indicator lights in
accordance with national road traffic regulations.

Intended use

The Sweeper is available as an attachment to a
two-point tractor hitch that is mounted on the front
of the tractor. The machinery is operated from the
tractor seat by means of a hydraulic cylinder .
The Sweeper is intended for use in construction site
clean up, road maintenance, light snow removal on
paved surfaces, car path maintenance.

Attachment

The Sweeper is available with two-point tractor
hitch.
Consult the tractors/loaders manual regarding safe
and correct connection between hitch and hitch
implement.
Check that all hydraulic couplings are connected
properly and that all hoses and fittings are
undamaged before activating the hydraulic system.
When the engine has been stopped, check that
there is no pressure remaining in the hydraulic
hoses by activating the tractors/loaders hydraulic
controls.
Hydraulic oil under pressure can penetrate the
skin and cause serious infections. Always protect
skin and eyes against spraying oil. Seek medical
assistance immediately if an accident should
happen and you are struck by hydraulic oil under
pressure.
The sweeper will be delivered ready from the
factory, greased and oiled, filled with hydraulic
motor oil (mineral based hydraulic oil with a
viscosity of 35 mm
/s)
2
– 7
English

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis