Blaupunkt 5VT7X00EME Bedienungsanleitung Seite 58

Follow the steps below to add dishwasher salt:
1. Remove the lower basket and unscrew the container cap.
2. Insert the end of the funnel (supplied) into the hole and add about 1.5 kg of dishwasher salt.
3. Fill the salt container with water to the maximum. It is normal for a small amount of water to
escape from the salt container.
4. Screw the cap back on after filling the container.
5. The salt warning light goes out once the salt container has been filled with salt.
6. Immediately after filling the salt into the salt container, a wash programme should be started
(we recommend a short programme). Otherwise, the filter system, pump or other important
parts of the appliance may be damaged by the salt water. This is not covered by the warranty.
NOTE:
• The salt container may only be refilled if the salt warning light (
illuminated. Depending on how well the salt dissolves, the salt warning light may remain on
even if the salt container is full.
If there is no salt warning light on the operating panel (on some models), you can estimate when
to refill the salt in the softener based on the number of wash cycles the dishwasher has run.
• If salt is spilled, run a soak or quick programme to remove it.
) in the operating panel is
8