Operation As A Pc Monitor; Power Management - Grundig THARUS 38 Serviceanleitung

Allgemeiner Teil / General Section
24
GEOMETRY
H. POSITION
V. POSITION
AUTO POSITION
FUNCTION
TRACKING
INFORMATION
TUNING
LANGUAGE
1 - 16

OPERATION AS A PC MONITOR

Power management

The monitor is equipped with a power management system. After a specific
period of time has passed without a signal, this system switches the screen to
standby. This is only possible with a graphic card which is compatible with the
VESA standard. The function must be activated in the operating system of the
computer.
If the computer monitor is switched to standby, the screen goes dark and the LED
display on the front side of the monitor blinks.
1
Switch the monitor back on from standby by moving the mouse or pressing
a key on the keyboard.
Note:
Before the monitor switches to standby, the message »INVALID MODE
CHECK CABLE or SIGNAL« appears.
Picture repetition frequency and resolution
The monitor is suitable for use with the following picture repetition frequency
and resolution.
Graphic card Resolution
720 x 400
640 x 480
VGA
640 x 480
640 x 480
800 x 600
SVGA
800 x 600
1024 x 768
XGA 1024 x 768
1024 x 768
Note:
If an invalid picture repetition frequency has been set, the indication
»INVALID MODE« appears on the monitor.
OPERATION AS A PC MONITOR
Connection
1
Connect the »VGA« jack and the PC monitor connection with a VGA cable.
2
Connect the »PC AUDIO
normal audio cable, available in most electrical stores.
Adjusting the picture geometry
1 Call up the menu with »
2 Select menu item »M« with »
3 Select »AUTOPOSITION« with »
The picture is automatically positioned correctly.
4
Finish the setting, by repeatedly pressing »
Note:
The position can also be set manually. To do this, select the »H. POSITION«
or »V. POSITION« line after point
position with » « or »
Setting the picture size and sharpness
1
Call up the menu with »
2
Select menu item »L« with »
3
Select »SETTING« with »P–« confirm with »OK«.
_____________________
Hor. frequency Vert. frequency Sync polarity
kHz Hz
31,469 70,087
31,469 59,940
37,500 75,000
43,269 85,008
46,875 75,000
53,674 85,061
48,363 60,004
60,023 75,029
68,677 84,997
___________________________________________
IN« jack and the audio output of the PC with a
i
«.
« and call up with »OK«.
P – « and call up with »OK«.
i
« until the menu disappears.
2
, call up with »OK« and correct the
«.
i
«.
« and confirmd with »OK«.
THARUS 38 – LCD 38-9210 TOP
H/V
-/+
-/-
-/-
-/-
+/+
+/+
-/-
+/+
+/+
25
GRUNDIG Service