Inhaltsverzeichnis
Werbung
Changing the Jaws
1. For changing the jaws first unscrew the lock
nut (5) and disassemble the article complete-
ly as shown on the left picture.
2. Replace the jaws by new once and re-tighten
the blind riveting attachment in reverse order.
3. One pair of jaws is included in delivers. If
necessary you can order replacement jaws
from Westfalia under the article no. 83 20 94.
Technical Data
Type
Dimensions
Weight
Nosepieces
Capacity
Aluminium Rivets
Stainl. Steel Rivets
Hex Shank
Recommended
Drive Machines
Cordless Drill
Reversible electric
and pneumatic
Drill/Driver
Min. Torque
RA-159
Ø 59 mm x 165 mm
300 g
2.4–3.2–4.0–4.8 mm
2.4 mm – 4.8 mm
2.4 mm – 4.0 mm
6.35 mm
12 – 14.4 - 18 V
15 Nm
12
Werbung
Inhaltsverzeichnis
