28/42
Bosch Rexroth AG
General information on damage to property and products
Dangerous electrical voltage
Under certain circumstances, compensation currents ("crossover currents"
according to EN 62135-1) may flow through the MPE protective conductor
connections. This means that human lives may be in danger in the event of an
insulation failure!
The compensation currents must generally be avoided because they may
interrupt the protective conductor connection through the protective
conductor jumper (MPE).
An interruption of the protective conductor connection will render the "direct
protective conductor connection" protective measure inoperative.
3
General information on damage to property
and products
For general notes on damages to property and products, refer to Table 1:
Required and supplementary documentation Rexroth PSG xxxx MF-Welding
Transformers Instructions and Rexroth PSG xxxx MF-Welding Transformers
Safety and user information.
The rectifier must not be used as load-bearing part.
The transformer housing must not be used as load-bearing construction element
of the welding gun.
4
Scope of delivery
For scope of delivery, refer to Table 1: Required and supplementary
documentation Rexroth PSG xxxx MF-Welding Transformers Instructions.
R911172343 | PSG3100.0x PSV
WARNING
NOTICE