Installation - Klarstein HOTSPOT Handbuch

INSTALLATION

1. The cooker hood should be placed at a distance of 65-75 cm (26-30 inch) from
the cooking surface for the best effect.
2. Install the hook on a suitable place once the installation height is fixed, and
keep it in line. The fixed position of the inside chimney bracket is the place of
chimney.
3. Fix the extensible pipe according to the lead direction and way, and then put
the cooker hood on the hook. See pic 3.
4. Put the glass according to the lead direction and way on the cooker hood, and
then use the screws to fix the glass, also lead the extensible pipe outside of
the room, meanwhile adjust the height of the inside chimney to the position
of the inside chimney bracket and fix on it by screw, here should be sure the
inside chimney can be flexed freely. See Pic 4.
5. Put the two chimneys together onto the cooker hood body, meanwhile adjust
the height of the inside chimney into the suitable height, and fix the inside
chimney to the inside chimney bracket by screw. Finally, fix the body with
safety screw. See Pic 5.
Note: The two safety vents are positioned on the back casing, with diameter of
6 mm.
EN
17