Hama 00012089 Bedienungsanleitung Seite 36

Timer Setup options:
X=1,2,3,4
The universal remote control has two timer
functions:
- A sleep timer for the TV (automatic shutoff
after 1 to 90 minutes); "Zzz" appears on
the display;
- Four additional timers for self-defined
commands (e.g. switching to another
channel); A bell symbol appears on the
display.
Setting a sleep timer without "Zzz" on the
display
a. Press and hold the Setup button for
approx. 3 seconds until CODE SETUP
appears.
b. Briefly press the Setup button twice more
to access the TIMER SETUP menu.
c. Press OK. The SLEEPTIM. TV menu
appears.
d. Press OK. TV-TIMER EINST. appears.
e. Press OK. The minutes flash on the
display.
f. Using the navigation buttons, set the time
after which the TV should automatically
shut down.
34
OR
OR
Press OK. The confirmation message FERTIG
appears on the display along with the TV
timer symbol "Zzz".
Place the remote control so that it has an
unobstructed line of sight to the device.
Switching off a sleep timer with "Zzz" on the
display
When a sleep timer is set ("Zzz" on the
display), in the steps described above the
words TV-TIMER AUS will appear instead of
TV-TIMER EINST.
a. Perform steps a. through d. as described
above.
b. TV-TIMER AUS appears. Press OK. The
message AUS BEST. appears.
c. Press OK. The confirmation message
FERTIG appears.
X=1,2,3,4
Y=1,2,3