First Use - Silvercrest SSSES 1.5 B2 Bedienungsanleitung

Fig. 3
7. Place the battery compartment latch
turn it clockwise towards lock
partment latch
Pay attention to the recesses on the inside of the main
appliance
8. Place the main appliance
Then turn the soap tank
and secure on the main appliance
now ready for use.

First use

1. Place the appliance on a level and stable surface.
2. Rotate the soap tank
main appliance
3. Turn the soap tank latch
the soap tank
4. Fill the soap tank
–
or
–
5. Fill up with water up to the marking max
tank
SSSES 1.5 B2
e
7
.
7
8
.
8
up to the marking 1:3
1 to 3 (one part soap to three parts water).
up to the marking 1:2
1 to 2 (one part soap to two parts water).
8
.
Fig. 4
until the battery com-
audibly clicks into place (see Fig. 2).
7
back onto the soap tank
8
clockwise until it is sitting tight
8
anticlockwise to remove it from the
.
9
anticlockwise to remove it from
with liquid soap:
w
to provide a mixture level of
q
to provide a mixture level of
e
back inside and
7
. The appliance is
0
in the soap
GB │ MT
8
.
│
49 ■