Herunterladen Diese Seite drucken

Viessmann 6337 Bedienungsanleitung Seite 3

H0 wannenanbauleuchte

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Gewährleistung
Jeder Artikel wurde vor Auslieferung auf volle Funktionalität
geprüft. Der Gewährleistungszeitraum beträgt 2 Jahre ab
Kaufdatum. Tritt in dieser Zeit ein Fehler auf und Sie finden
die Fehlerursache nicht, nehmen Sie bitte Kontakt mit uns
auf (service@viessmann-modell.com). Senden Sie uns den
Artikel zur Kontrolle bzw. Reparatur bitte erst nach Rückspra-
che zu. Wird nach Überprüfung des Artikels ein Herstell- oder
Materialfehler festgestellt, wird er kostenlos instandgesetzt
oder ausgetauscht. Von der Gewährleistung und Haftung
ausgeschlossen sind Beschädigungen des Artikels sowie Fol-
geschäden, die durch unsachgemäße Behandlung, Nichtbe-
achten der Bedienungsanleitung, nicht bestimmungsgemäßen
Gebrauch, eigenmächtigen Eingriff, bauliche Veränderungen,
Gewalteinwirkung, Überhitzung u. ä. verursacht werden.
6. Technische Daten
Betriebsspannung:
Stromaufnahme:
1. Important information
Please read this manual completely and attentively before using
the product for the first time. Keep this manual. It is part of the
product.
1.1 Safety instructions
Caution:
Risk of injury!
Due to the detailed reproduction of the original and the in-
tended use, this product can have peaks, edges and break-
able parts. Tools are required for installation.
Electrical hazard!
Never put the connecting wires into a power socket! Regularly
examine the transformer for damage. In case of any damage,
do not use the transformer.
Make sure that the power supply is switched off when you
mount the device and connect the cables!
Only use VDE/EN tested special model train transformers
for the power supply!
The power sources must be protected to avoid the risk of
burning cables.
1.2 Using the product for its correct purpose
This product is intended:
-
For installation in model train layouts and dioramas.
-
For connection to an authorized model train transformer
(e. g. item 5200).
-
For operation in dry rooms only.
Using the product for any other purpose is not approved and is
considered inappropriate. The manufacturer is not responsible
for any damage resulting from the improper use of this product.
3
(mit und ohne Art. 5215, Powermodul)
EN
10 – 16 V AC ~
14 – 24 V DC =
13 – 24 V Digitalsignal
ca. 1 mA

Werbung

loading