Electromagnetic Fields (Emf); Safety Regulations - Blaupunkt PW7200i Bedienungsanleitung

Blaupunkt replacement parts Main cables may only be replaced by the manufacturer, an authorised service centre or
qualified person.
• Check extension cables regularly for signs of damage. Damaged extension cables must be replaced. Cable reels should
only be used when fully unwound.

ELECTROMAGNETIC FIELDS (EMF)

• This Power Tool complies with all standards regarding electromagnetic fields (EMF). lf handled properly and according
to the instructions in this user manual, the Power Tool is safe to use based on scientific evidence available today.
DANGER
• Never soak/immerse the power tool in water or any other liquids.
• Do not put cleaning detergents, vinegar or other cleansers on to the power tool.
• Do not use chemically processed water.
WARNING
• Check if the voltage quoted on the model plate of the power tool is suitable for the local mains voltage before
connecting the Power Tool to the mains.
• DO NOT use if the Power Tool has signs of damage to the mains plug / cable, casing or if the Power Tool itself is
damaged). lf the Power Tool leaks or is cracked DO NOT use.
• Please contact Blaupunkt if your Power Tool is damaged.
• Do not allow the Power Tool to run unattended. Always switch the Power Tool off and unplug from the mains when
not in use. Do not leave the power tool until it has come to a complete stop. - DO NOT LEAVE THE POWER TOOL
UNATTENDED IN THE PRESENCE OF CHILDREN OR ANIMALS.
• Keep children far from the area where you are working and DO NOT allow children to drag / pull the power cable, this
could cause serious injury.
• Do not use other high-power electrical Power Tools on the same circuit, this will help prevent overload.
• Always place and use the Power Tool on a stable, level and horizontal surface.
• Disconnect the power tool from the mains switch in the locked off position before making any adjustments, changing
accessories, or storing the power tool. Such preventative safety measures reduce the risk of starting the power tool
accidentally.
• Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by
hand or against your body is unstable and may lead to a loss of control.
• Maintain / clean power tools with care
• Use only accessories that are recommended by the Blaupunkt for your model. Accessories that may be suitable for one
power tool may create a risk of injury when used on another power tool.

SAFETY REGULATIONS

WARNING!
Read all the instructions before using the machine.
WARNING!
Machines shall not be used by children. Children should be supervised to ensure that they do not play with the
machine. This machine is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge.
WARNING!
The electrical supply connection shall be made by a qualified person and comply with IEC 60364-1. The electric supply
to this machine should include either a residual current device that will interrupt the supply if the leakage current to
earth exceeds 30 mA for 30 ms or a device that will prove the earth circuit.
WARNING:
The machine is intended to be used at a temperature above o degree. (Only for machine with power cord of H05VV-F).
WARNING: The operating method to be followed in the event of accident (e.g. contact with detergents: rinse with an
abundance of clean water) or breakdown to prevent unsafe situations.
WARNING:
This machine has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The
use of other cleaning agents or chemicals may adversely affect the safety of the machine.
WARNING:
Recommend the operator to wear ear protectors.
WARNING:
Do not use the machine within range of persons unless they wear protective clothing.
EN