Kompakt Connector 4
GS-CP/ENG2
Kompaktstecker 4
Open the secondary locking in direction
"4".
4
Fig. 7: Kompakt 4 2-way
(secondary locking closed)
Press the terminal forwards by slightly
pushing the cable in direction "X".
Insert the extracting tool forwards in
direction "Y" into the extraction hole as
far as the stop.
Y
Fig. 8: Disassembling of the terminals
(Kompakt 4 2-way with locking hook and CPA)
Pull out the terminal on the cable (Fig.
9).
Robert Bosch GmbH reserves all rights including industrial property rights. We reserve all rights of disposal, such as copying and passing on to third parties.
Alle Rechte bei Robert Bosch GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns
Assembly Instruction/
Montagevorschrift
(single wire sealed)
(Einzeladerdichtsystem)
X
Number / Nummer:
1 928 A01 61M-
en/de
Author / Bearbeiter:
Ansel
Die Sekundärverriegelung in Richtung
"4" öffnen.
4
Abb. 7: Kompakt 4 2-polig
(Sekundärverriegelung geschlossen)
Kontakt durch Schieben am Kabel etwas
nach vorne in Richtung "X" drücken.
Demontagewerkzeug in die
Demontageöffnung bis zum Anschlag in
Richtung "Y" einführen.
Y
Abb. 8: Demontage der Kontakte
(Kompakt 4 2-polig mit Rasthaken und CPA)
Kontakt am Kabel nach hinten
herausziehen (Abb. 9).
Page/Seite:
Date / Datum:
7 (11)
07.07.2009
Phone / Telefon:
-
X