Operation - Silvercrest SPS 450 A1 Bedienungsanleitung

Operation

NOTES
► Do not operate the appliance for more than 90 seconds.
Allow it to cool down before using it again.
The motor unit 6 is equipped with overheating protection.
►
If the motor becomes too hot due to overload, the appliance
will stop. As soon as the motor unit 6 has cooled down to
room temperature, you can operate the appliance again.
If you have not already done so, mount the blender jug 3 on
♦
the motor unit 6 by placing the blender jug 3 on the motor
unit 6 and turning it clockwise. When doing so, note the
catches on the blender jug 3 and the corresponding recesses
on the motor unit 6.
Pour the required liquids into the blender jug 3. The ideal fill
♦
quantity is 250‒450 ml. Do not fill the blender jug 3 further
than the MAX marking.
♦ Press the On/Off switch
♦ Carefully pour powdered ingredients, such as protein powder,
into the blender jug while it is operating 3.
♦ Press the On/Off switch
mixture is obtained.
To transport the filled blender jug 3, put the lid 2 on it and
♦
tighten it by turning it clockwise. You should also ensure that
the drinking opening 1 is tightly closed.
│ GB │ IE
■ 26
7 to activate the whisk 5.
7 again as soon as a uniform
SPS 450 A1