Product Description; Control - IKEA FULLGÖRA Handbuch

ENGLISH

Product description

1
1
2
2
5
6
3
4
6
7
4
5

Control

A
Freezer System Control
B
Temperature display
C
On/Stand-by
A
Freezer System Control
Freezer System Control is an advanced technology that reduces
temperature fluctuations in the whole freezer compartment to
minimum.
To activate/deactivate the "Freeze System Control" function press
I
for 3 seconds the button.
If the function is engaged and the user modify the freezer
temperature out of the working range, the function is
automatically switched off.
In case of Fast freezing is engaged, the function "Freeze System
Control" is inhibited until the Fast Freeze function switched off.
C
On/Stand-by
This function turns On/Stand-by the freezer compartments.
To put the product in Stand-by, press & hold the
3 seconds. When the appliance is in Stand-by, the light inside
the freezer compartment does not work. Remember that this
operation does not disconnect the appliance from the power
supply. To switch the appliance On again, simply press the On/
Stand-By button .
Note: this procedure does not disconnect the appliance from
the electricity supply.
B
Temperature display
The display shows the freezer compartment temperature
(between -16°C and -24°C). Recommended setting: -18°C or -20°
1
Control panel
2
Led light
3
Glass shelves
4
Rating plate
5
flaps freezer
6
Drawers Freezer
Characteristics, technical data and images may vary
according to the model.
Accessories
Freezer block
A I C B
E H
D
Fast Freeze
E
Eco function
F
Black Out alarm
It is possible to set a different temperature with the
Fast Freeze
The use of this function is recommended when placing a very
high quantity of food to be frozen in the freezer compartment.
24 hours before freezing fresh food, press the Fast Freeze button
to activate the Fast Freeze function. When activated, the Fast
Freeze indicator turns on. After 24 hours place the food to be
frozen in the freezing zone of freezer compartment.The function
is automatically disabled after 50 hours, or can be manually
disabled by pressing Fast Freeze button.
Eco function
The Eco function enables appliance energy consumption to be
concentrated in the reduced rate hours (generally at night),
C
button for
when electricity is readily available and costs less than during
the daytime (only in countries that utilise a time based multi-rate
system - check energy rates with the local electricity company).
To activate the function, press
rate start time (depending on the specific rates plan). For
example, if the reduced rate starts at 8 p.m., press the button
E
at that time. When the Eco indicator is ON, the function is
ON. Once the function is activated, the appliance automatically
adapts energy consumption according to the time selected, i.e.
consuming less energy during the day than at night.
IMPORTANT: To operate properly, the function must be
Ice tray
1x
D
F G
G
Turning off the sound alarm
H
Temperature setting
I
System Control
D
E
E
for 3 seconds at the reduced
1x
H
button.
8