Additonal Light Switch - Miele DSM 400 Funktionsbeschreibung/Montageanweisung

Additonal light switch

(connection must be made a suitably
qualified electrician only)
^ Before connecting to an additional
light switch the lid of the control
module has to be taken off. It is
refitted later.
Connection can be made to a light
switch in the home via the middle
terminal b in the control module.
en – Electrical connection
This will then enable the cooker hood
lighting to be switched on and off, or
dimmed.
If the hob lighting is activated by an
external lightswitch, the canopy tilts
forwards and the hob lighting is
switched on.
If the hob lighting is switched off, the
canopy remains open.
The feature lighting cannot be operated
via the control module.
The lighting can still be operated as
usual via the controls on the cooker
hood.
If a window contact switch has not
been connected to the control module,
terminal a will have to be bridged.
11