Muting The Microphone; Call Forwarding; Intercom And Conference Calls; New Message In Voice Mail - Silvercrest IAN 86524 Bedienungsanleitung

SilverCrest SGKT 50 A1

Muting the microphone

You can mute the microphone during a call so you can speak without the other party hearing you.
To do this, press the button [26] during a call. The microphone will be muted and the icon
appears on the display [17].
Press the button [26] again to switch the microphone back on.

Call forwarding

During an external call press and hold the Locator button [25] for approx. three seconds (a short
beep can be heard). "INT" will appear on the display [17]. Next enter the number of the handset
that you want to call. As soon as the connection to the handset has been established, you can talk
internally. Put down the receiver to end the external call and to forward it to the handset.

Intercom and conference calls

During an external call press and hold the Locator button [25] for approx. 3 seconds (a short beep
can be heard). "INT" will appear on the display [17]. Next enter the number of the handset that
you want to call. As soon as the connection to the handset has been established, you can talk
internally. Press the Locator button [25] to toggle between the external and the internal call.
Press and hold the locator button [25] for approx. 3 seconds to make a conference call.

New message in voice mail

If there are new messages in the voice mail, the icon appears on the display [17]. After you
have listened to the voice mail message, the icon disappears.
To be able to use the voice mail, your provider must support it.

Handset locator

This features lets you locate your handset if you have misplaced it. While the base is in standby
mode, press the Locator button [25]. The handset emits a tone for approx. 30 seconds and the Call
LED [13] flashes.
To disable the tone and the flashing Call LED [13] press any button on the handset.
English - 173