Philips FC6149 Bedienungsanleitung Seite 15

Problem
The charging light
does not go on.
The vacuum
cleaner does not
vacuum properly.
Dust escapes
from the vacuum
cleaner.
The vacuum
cleaner does not
work properly
when the hose,
the brush tool or
the crevice tool
is attached.
Solution
Make sure that the adapter is inserted properly in
the wall socket and that the appliance is switched off.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
The dust compartment may be full. Empty the dust
compartment.
The ilter unit may be clogged. Clean the inner ilter
and the outer ilter (see chapter 'Cleaning').
The dust compartment may be full. Empty the dust
compartment.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
Perhaps the ilter unit is not placed properly in the
dust compartment. Place the ilter unit properly in
the dust compartment.
Check if the hose, the brush head or the crevice
tool is blocked. If this is the case, remove the
obstruction.
The dust compartment may be full. Empty the dust
compartment.
The ilter unit may be clogged. Clean the inner ilter
and the outer ilter (see chapter 'Cleaning').
English
15