Fitting To Mobile Units And Baskets With Silicone Adapters; Filters - Miele A 814 Gebrauchsanweisung

en - Areas of application
Fitting to mobile
units and baskets
with silicone ad-
apters
34
Follow the fitting instructions in the operating instructions for the A

812 and A 813 adapters.
Screw the A 814 and A 814/1 holders into the ports on the ad-

apters.
 Ports that are not in use must be sealed with a blind stopper.
The 4th port must always be sealed with a blind stopper.
The A 814 and A 814/1 holders must be firmly screwed in place. In
the case of baskets and mobile units with silicone adapters, an
A 812 adapter must be used that can then be fitted with up to 3 A
814 and A 814/1 holders.
 Inserting the A 814 and A 814/1 holders into a silicone adapter
is not permitted.

Filters

The wash water used for reprocessing loads with narrow lumens
needs to be filtered.
The injector manifold must be fitted with an A 800 tubular filter.

The tubular filter is supplied with its own operating instructions.
Follow the instructions on how to perform regular cleaning on the
tubular filter.