Panasonic EY74A2 Bedienungsanleitung Seite 13

Battery level indication is just guide.
The indication may change due to the
condition of battery or ambient tempera-
ture.
Excessive (complete) discharging of
lithium ion batteries shortens their service
life dramatically. The driver includes a
battery protection feature designed to
prevent excessive discharging of the
battery pack.
EY74A2_EU.indb
Downloaded from www.Manualslib.com
Indicator Battery status
3 lamps Charged
illuminated enough
2 lamps Approx. 60%
illuminated remaining
Battery level is
One lamp low.
illuminated Need to be
charged soon
Empty
3 lamps Need to be
flashing charged imme-
diately
13
manuals search engine
Bit-locking Function
1. With the trigger switch not engaged and
a screwdriver bit locked in place, the
tool can be used as a manual screw-
driver (up to 22.6 N•m, 230 kgf•cm, 199
in•lbs).
There will be a little play in the chuck,
but this is not a malfunction.
2. This feature is handy for tightening
screws that require more torque than
the maximum torque of the driver
(position on the clutch), for confirm-
ing the tightness of a screw or to loosen
an extremely tight screw.
Changing the Belt Hook Location Side
[Fig.8]
The belt hook can be attached to either
side of the unit.
1. Removing the hook
(1) Remove the nut.
(2) Draw out the hook.
2. Attaching the hook to the other side
(1) Insert the hook in the other side.
(2) Tighten the nut fully so that it
securely fastened.
- 13 -
EN
2015/07/16 11:32:15