Getting Started - Conrad sygonix Bedienungsanleitung

8. Getting started

If you are not planning to use the air purifier for a long period of time, we recommend leaving the filter inside
Pull the handle of the filter cover to open the housing.dddRemove the air filter from the housing. fff
its plastic packaging until it is ready to be used, to keep it clean.
1. Pull the handle of the filter cover to open the hous-
ing and remove the air filter.
3. Replace the filter cover by lining up the cover tabs
with the slots on the bottom of the housing.
2. Remove the filter from the plastic packaging, then
install it into the housing. Make sure the pull tabs on
the filter are facing out.
4. Push the cover securely closed.
The air purifier uses a magnetic safety trigger to
make sure that the filter cover is closed. If not
properly closed, the air purifier will not turn on.
23