Product Description - Parkside 326376 Montage-Und Sicherheitshinweise

Legend for the used pictograms
Legend for the used pictograms
Read the
installation
instructions!
Observe the
warnings and
safety
precautions!
Introduction
Congratulations on your purchase. Before
installation and initial operation, familiarise
yourself with the product. For this purpose, read
the following installation instructions and safety
precautions carefully. Only use the product as
described and for the specified purposes. Store
these instructions with care. When passing
the product on to a third-party, pass on all
documentation pertaining to the product.

Product description

Proper use
The workbench and vice is used for clamping
workpieces and objects to be processed, e.g.
for sawing, grinding, polishing, painting, cleaning
and also for holding together glued items. It is
designed for DIY tasks in the domestic sector.
Any other use is considered incorrect, that
includes ignoring these operating instructions.
The workbench and vice is not designed for
commercial use.
max.
Maximum
150 kg
payload 150 kg
TÜV Süd
Tested safety
Technical data
Dimensions (when set up),
approx. W x H x D
Dimensions (when folded),
approx. W x H x D
Net weight
Payload
Safety precautions
Check the product after delivery and before first
use to determine the condition and function of
all parts. Never use the product if it is damaged.
Otherwise there is a risk of injury. Do not use a
damaged product.
Observe the following safety precautions in order
to prevent injuries and property damages:
• Before each use, check the screw connections
to ensure they are properly seated.
• Check all moving parts for ease of movement.
• Do not use the bench as a seat. Do not use as
step, standing aid or ladder.
• Do not use the bench to set up scaffolding.
• Do not exceed the permitted payload of a
maximum of 150 kg with an evenly placed
load.
• Position placed and clamped objects centrally
on the bench-top if possible.
• Ensure additional support for the ends of long
workpieces that protrude beyond the bench.
• Set the bench up on a firm, even surface so
that all four legs make contact with the floor.
Use wooden shims to even out any minor
irregularities.
• Use the vice mechanism to secure workpieces
firmly before processing.
605 x 790 x 630 mm
605 x 945 x 155 mm
6.3 kg
maximum of 150 kg
when loaded evenly
23