Creating Your Own Program; (Program Play) - Sony CFD-360 Bedienungsanleitung

Creating your
own program

(Program Play)

You can make a program of up to 20
tracks in the order you want them to be
played.
Tips
• You can play the same
program again, since
the program is saved
until you open the CD
compartment.
• You can record your
own program. After
you've created the
program, insert a blank
tape into the tape
compartment and press
r to start recording.
CFD-360.E.G_3-858-521-1X.CED/CEE/CEK/EE1
DISPLAY/ENTER
1
Press p.
"Cd" appears in the display.
2
Press MODE until "PGM" appears in the display.
3
Press = or + and press DISPLAY/ENTER for
the tracks you want to program in the order you
want. You can program up to 20 tracks.
Programed track
4
Press ^ to start program play.
To cancel Program Play
Press MODE until "PGM" disappears in the display.
To check the order of tracks before play
Press DISPLAY/ENTER.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.
^ p
MODE
= +
Playing order
The CD Player
EN
15