Velleman CCTVPROM17 Schnelleinstieg Seite 7

7. Operation
Display
The following image shows the screen layout.
Note that actual screen icons might differ slightly from the ones shown above.
Quick Menu Bar
Note: Only available when USB mouse is connected.
Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:
Recording
1. Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.
2. If the auto-recording and pre-alarm functions are enabled, the device will start recording images.
By default, the recording icon (
o
If the motion or alarm detection is activated and a motion or alarm is detected, the motion (
o
alarm (
V. 02 – 28/08/2013
Downloaded from www.Manualslib.com
live audio from audio channel 1-4
(indicated in white)
audio channel unselected
digital zoom on (yellow) / off
LAN connected / internet connected / no network connection
USB flash drive connected
key lock on
sequence mode
recording mode
administrator logged on
Open channel switch panel.
Show playback control panel.
Zoom-in mode (select desired channel first before entering zoom mode).
Select audio channel (live mode only live channels can be selected).
Enter PTZ mode and show PTZ control panel.
) icon is displayed.
manuals search engine
CCTVPROM17
A system date and time
B general system status
C available HDD capacity
D channel status
playback audio from audio channel 1-4
(indicated in yellow)
timer recording on
USB mouse connected
overwrite on (default)
PTZ mode
motion mode
alarm mode
operator logged on
) is displayed.
7
) resp.
©Velleman nv