Safety Notes - Hama I 550 Bedienungsanleitung

00057106bda.indd Abs3:12 00057106bda.indd Abs3:12
Downloaded from www.Manualslib.com
FAQ
The subwoofer and the satellites do not work.
Be sure that the on/off on the subwoofer is set to „ON"
and that the wall socket that you are using is live.
If this does not solve the problem, check your computer's
sound settings.
Windows XP
Windows Vista
Be sure that the sound card you are using is the default
device for sound playback under „Sounds and Audio
Devices" (XP) or „Sound" (Vista) in the control panel and
that there is no checkmark next to the „Mute" function.
The sound is distorted
Check that the speaker connection cables are connected
correctly and are not loose in the terminal.
The plugs on the connecting cable must be fully inserted
into the sockets and may not stick out.
Be sure that you have made the settings in your operating
system as is described in „Settings with Windows XP" or
„Settings with Windows Vista".
12
manuals search engine

Safety notes:

• Use the loudspeakers only in closed, dry spaces.
• Be sure that the mains power supply is 230 V/50 Hz.
• Route that cable so that no one will walk on it or trip
over it and so that it cannot be damaged by objects
that lie on it.
• Do not allow objects such as paper clips, etc. to enter
the speaker, since these may cause a short circuit.
• Keep all liquids away.
• Use only a dry cloth for cleaning. If the unit is
extremely soiled, use a slightly dampened cloth.
• Switching off the on/off switch does not disconnect
the speaker from the mains voltage. The mains plug
must be pulled out of the wall socket in order to
disconnect the speakers from the mains voltage
completely.
• Repair work may only be performed by authorized
technicians.
Specifi cations:
Subwoofer
Output power: 8 watts; <1% THD+n
Frequency response: 23 Hz - 150 Hz
Dimensions: 15,5 x 21,5 x 26,5 cm
Woofers: 102 mm
Satellites:
Output power: 2 x 5 watts; <1% THD+n
Frequency response: 160 Hz - 20 kHz
Dimensions: 11,5 x 9,5 x 11,5 cm
Loudspeakers: 76 mm
The indicated sine-wave power output refers to the
amplifi er power output.
20.02.2008 14:12:34 Uhr 20.02.2008 14:12:34 Uhr