Technical Data; Ec Declaration Of Conformity; Operators Manual - Husqvarna Automower Connect 2G Bedienungsanweisung

Problem with the connection to the
Internet server.
Problem with the SIM card or the module.
1.4 Operation
1.4.1 Main menu
Dashboard : Shows the current status of the
•
product. It shows symbols for the battery status
and cutting height.

1.5 Technical data

Frequency Band Support
®
Automower Connect 2G
®
Automower Connect 3G
Power Class
®
Automower Connect 2G
®
Automower Connect 3G

1.6 EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the communication kit
®
Husqvarna Automower Connect 3G/2G with serial
numbers dating 2020 week 40 and onwards (the year
and week is clearly stated on the rating plate, followed
by the serial number), comply with the requirements of
the COUNCIL'S DIRECTIVES as listed below including
applied standards.
• Directive on "restriction of use of certain hazardous
substances" 2011/65/EU.
• EN IEC 63000:2018
• Directive "relating to radio equipment" 2014/53/EU.
Safety
• EN 62368-1:2014+A11:2017
• Electromagnetic compatibility:
• ETSI EN 301 489-1 V2.2.3
• ETSI EN 301 489-19 V2.1.1
• ETSI EN 301 489-52 V1.1.1
• Efficient use of the spectrum:
• ETSI EN 301 908-1 V11.1.1
1428 - 003 - 08.09.2020
•
•
1.4.2 My mowers
My mowers shows the status of the product, you can
remove or add products paired to the account.
GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz
Band 19 (800 MHz), Band 5 (850 MHz), Band 8 (900 MHz), Band 2 (1900 MHz),
Band 1 (2100 MHz)
Power Class 4 (for GSM/E-GSM)
Power Class 1 (for DCS/PCS)
Power Class 3
1.7 Applicable to US/CA market
1.7.1 Compliance requirements
FCC ID: XPY1CGM5NNN (Automower
module 2G/3G)
The device complies with part 15 of the FCC Rules.
Operation is subjected to the following 2 conditions:
1.
2.
Map : Shows the current position of the product and
the set centerpoint for GeoFence. You can monitor
the movement of the product with this function, for
example in case of theft.
Messages (only available for Bluetooth
range connectivity): In this menu the fault and
information messages can be found. For some of
the messages, there is information to help you to
correct the fault.
33 dBm
30 dBm
24 dBm
• ETSI EN 301 908-2 V11.1.2
• ETSI EN 301 511 V12.5.1
• ETSI EN 303 413 V1.1.1
This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired
operation.
®
short-
®
Connect

Operators manual - 3