Westfalia 91 94 13 Originalanleitung Seite 12

 Do not lead the power cord around sharp
corners or over hot surfaces. Use cable glands if
necessary.
 Tighten all screws after adjustment and frequent-
ly inspect the unit to make sure that it is securely
attached.
 Do not expose the LED work light to oil, grease,
dust/dirt, extreme temperatures, strong vibra-
tions and mechanical stress.
 Do not continue to use the unit if the unit is
damaged. Repair work must be done by a quali-
fied service technician.
 To avoid danger of fire and personal injuries,
operate the work light only with the protective
cover in place and replace a broken cover im-
mediately.
 The LED cannot be replaced.
 Do not disassemble the unit or attempt to modify
or repair it yourself. It does not contain parts
serviceable by you. In case of questions or prob-
lems, turn to our customer service.
 Do not direct the light beam towards people or
animals.
 Do not use devices which can strongly focus
light for viewing the light beam.
Safety Notes
8