Conrad 46 93 89 Bedienungsanleitung Seite 2

4-Port USB 3.0 PCI-Express Card
Item no. 46 93 89
Intended use
The product is intended for installation to a PCI-Express slot on a computer, there providing four external
USB 3.0 ports for use.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB 3.0 PCI-Express card
• CD with driver
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• Electrostatic charges may damage electronic components. Do not touch electronic components
with your bare hands.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Installation
If you do not have thorough knowledge on the installation of this product, have the
installation carried out by a professional or in a specialist shop!
Incorrect installation of the product will cause damage to the product, your computer and
all connected devices.
Caution, Risk of fatal injury!
Turn off the computer in which you wish to install the product, and all connected devices.
Disconnect all devices from the power supply by unplugging them. Simply turning off the
devices using the on/off switch does not mean a device is voltage-free!
• Open your computer's case and remove the lid carefully.
• Search for a free PCI-Express slot, remove the respective slot cover and insert the PCI-Express card into
the PCI-Express slot. Tighten the PCI-Express card and check for a proper fit inside the PCI-Express slot!
• Connect the suitable plug of your PC mains adapter to the respective port on your PCI-Express card. Make
sure the plug is connected properly, and do not use force.
When not connecting the power supply to the PCI-Express card, none of the connected USB
devices will function!
• If necessary, fasten all cables using cable ties to prevent them from hanging into your computer's CPU fan.
• Reclose your computer's case.
• Connect your computer and monitor to the power supply, and turn on all devices.
• If your computer does not start up normally, turn it off immediately, and check all settings and cable
Version 07/13
connections.
Before reopening your computer, disconnect it from the power supply; see above!
Driver installation
• After Windows® has started, it will automatically identify the PCI-Express card as new hardware.
• Insert the included CD into the corresponding drive on your computer.
At the time of creating these operating instructions, the driver was stored as an installation
program in the "Driver Installation" directory.
Start Windows® file manager and launch the installation program located in the above-named
directory.
If might be necessary to restart Windows® in order for the USB 3.0 ports on the PCI-Express
card to function properly.
Windows® 8 does not require driver installation.
Connecting USB devices to the PCI-Express card
Important:
It is necessary to connect the power supply of the PCI-Express card to a suitable connector
on your PC mains adapter.
Otherwise the USB devices connected to the PCI-Express card will not be identified properly!
a) USB 2.0/1.1 devices
• A USB 3.0 port also supports "old" USB 2.0/1.1 devices. Simply connect the USB device to one of the four
USB ports on the PCI-Express card.
• Use USB 2.0/1.1 connection cables to connect USB 2.0/1.1 devices.
• USB 2.0/1.1 devices will not work faster when operated from a USB 3.0 port. If the USB 2.0 controller on
the mainboard, however, works slowly, it might for example be possible for USB 2.0 hard disks connected
to a USB 3.0 port on the PCI-Express card to transfer data at a higher speed.
b) USB 3.0 devices
• Connecting a USB 3.0 device to the PCI-Express card requires a USB 3.0 cable. A USB A plug may look
a great deal like a USB 2.0/1.1 plug, however it has additional connecting components. A USB B plug on
a USB 3.0 cable has a different form.
• To use the USB 3.0 at its full speed, in addition to a USB 3.0 port on your computer, you also need a
USB 3.0 device and a fitting USB 3.0 cable.
• USB 3.0 provides a theoretical transfer rate of 5 Gbit/s (equaling to approx. 600 MByte/s). However, the
actual speed reached during operation will depend on the devices transferring data (internal and external
hard drive), the type of data (many small files or few large files) and many other factors.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Slot ........................................................ PCI-Express
USB ports .............................................. 4 x USB 3.0
System requirements ............................. Windows® XP SP1, SP2, SP3 (only 32 Bit)
...............................................................
...............................................................
...............................................................
...............................................................
Operating conditions .............................. -10 to +40 ºC, 10 – 85 % RH
Storage conditions ................................. -15 to +55 ºC, 5 – 95 % RH
Dimensions (W x H x D) ........................ 120 x 19 x 77 mm (with slot bracket)
Weight ................................................... 46 g
Windows® Vista™ (32/64 Bit)
Windows® 7 (32/64 Bit)
Windows® 8, 8 Pro, Enterprise
Linux Kernel 2.6.31 or higher
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE. V1_0713_02-ETS-Mkde