Samsung SDP-960 Benutzerhandbuch Seite 30

setup & application
2. Present the microscopic adapter lens as close to the ocular piece of the focus-fixed microscope as
possible, and adjust the position of the digital presenter so that the round shape on the screen is
positioned at the center of the monitoring screen.
3. From the menu, select ZOOM/FOCUS  MICROSCOPE MODE.
4. Check if the lens fits the focus.
If it is out of focus, use the micro-motion device of the microscope to fit the focus and try again.
5. Press [ESC (²)] to release the microscope mode.
M

If a macro mode adapter lens is equipped, you can make a short-distance recording of the minimum of 1cm.
J 
In microscope mode, the auto exposure function will be performed by adjusting only the center area of the
image.
30_
setup & application
ZOOM / FOCUS SETTING
MACRO MODE

MICROSCOPE MODE }
D-ZOOM MAX x4
RETURN }
}