Information Display - Blaupunkt Frida Bedienungsanleitung

LC- CONTROL DISPLAY (Computer model no. 2)
Control Unit Function Overview
1.1 Power Button ON/ OFF
Hold button for 2 seconds to switch
on/off the LED control unit and electric drive
system.
The system will automatically turn off if left
idling for more than 10 minutes.
1.2 Assist mode
Hold or buttons to select the
desired assist level for electric system. The
lowest is Level 1 and the highest is Level 3.
When powered on, the default is Level 1.
When there is no numeric power level
displayed it means the folding e-bike is in
park or it functions as a standard bike with
no assist from the motor. You will feel the
electric assistance kicking in once selecting
again between Levels 1 up to 3.
SAFETY NOTE: When you move the pedals, the
engine can start if you are not yet safely on the
bike. Do not switch on the computer until you
have taken a seat on the folding e-bike or set
the support level to 0. Set the support to 0
before getting off the bike.
1.3 Lights/ Backlit Button ON/ OFF
With the display switched on, hold the
button for 2 seconds to turn on/ off the
headlight, taillight and the display backlight.
There are five levels of backlight brightness
that can be selected by user.

1.4 Information display

You can toggle between various
information, press button to view: Trip
distance -> Total distance -> Trip duration
(hours)
SAFETY NOTE:
Only operate settings in case of parking the
folding e-bike.