Checking the Digital-Signal Information
You can get information about the signal status.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
Press the ▲ or ▼ button to select "Signal Information", then press the
2.
ENTER
button.
3.
Press the EXIT button to exit.
➣
If the signal status is poor, the "Weak or No Signal" message is displayed.
➣
While viewing a Digital channel, this function can be selected.
English - 24
Channel Mode
: Added Ch.
Fine Tune
Signal Information
Signal Information
Frequency
: 482000 KHz
Service ID
: 0401
Multiplex
: (TSID 0004, ONID 20fa)
Network
: (ID 20fa)
Bit error level
Signal Strength
OK
Enter
►
0
88
Return