Installation - Siemens ANT792-6MN Kompaktbetriebsanleitung

English
3

Installation

Wall mounting
Mast mounting
24
Downloaded from www.Manualslib.com
Figure 3-1 Options for Mounting the ANT792-6MN
Mount the antenna mounting plate at the wall by means of 2 screws.
Use two holes (see position A in the figure above).
Mount the antenna mounting plate on the mast using two hose clips
(see position B in the figure above).
Position the hose clips that they fit into the recesses in the antenna
mounting plate.
The tightening torque is 3.5 Nm.
manuals search engine
Compact Operating Instructions ANT792-6MN
A5E01116923B-04