Hama 00121776 Bedienungsanleitung Seite 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to speci c hazards and
risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• HDMI splitter with integrated USB cable
• Operating instructions
3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Children should be supervised to ensure that they
do not play with the device.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
• Do not open the device or continue to operate it if
it becomes damaged.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
2
• Use the item only in moderate climatic conditions.
• Keep this product, as all electrical products, out of
the reach of children!
• Do not use the product in moist environments and
avoid splashes.
• Lay all cables so that they do not pose a tripping
hazard.
4. Functions
• Output: 2 HDMI sockets
• Input: 1 HDMI plug
• Plug and play installation (no software necessary)
5. Installing/connecting two HDMI playback
devices
• Connect the HDMI plug to your HDMI source
device (for example, Blu-ray or set-top box).
• Connect your two HDMI playback devices (for
example, at-screen TV and projector, or at-
screen TV and at-screen TV) to the HDMI sockets
using an HDMI cable (not included).
• Connect the USB cable to an unused USB port on
your TV or set-top box.
• Alternatively, use an external USB power supply
unit for power supply.
• Switch on the desired source and playback devices.
Note
For cable lengths of over 10 m, repeaters must be
used in order to ensure playback quality.