Pairing And Connecting - LG TONE Flex HBS-XL7 Bedienungsanleitung

Pairing and Connecting

Put in your earbuds to easily pair and connect by following the voice prompts.
NOTE: If you are prompted for the authorization code (PIN code), type 0000.
If you hear that the battery is insufficient, recharge the battery before
proceeding with pairing.
If pairing is not completed within three minutes, the power automatically
turns off. If this happens, press and hold the MFB for two seconds to turn
on the power.
Connecting Quickly
1
4
LG HBS-XXX
1 From the mobile phone's Settings menu, turn on Bluetooth.
2 On the headset, press and hold the MFB for two seconds to turn on the power.
3 The blue Indicator Lamp turns on, and the headset enters Search mode.
4 From the mobile phone or device, select [LG HBS-XXX] to connect.
NOTE: In the above, HBS-XXX is a model number unique to the product and may differ depending
on the model (For example, in the case of a HBS-XL7 model, LG HBS-XL7 is displayed).
5 A voice message will indicate that the connection is completed.
2
5
3