Use­the­optical­socket; Use­the­aux­socket - Grundig GSB 910 S Handbuch

CONNECtIONS­ ______________________________
Use­the­HdMI­(arC)­Socket
arC­(audio­return­Channel)
The ARC (Audio Return Channel) function allows you
to send audio from your ARC- compliant TV to your
sound bar through a single HDMI connection. To en-
joy the ARC function, please ensure your TV is both
HDMI-CEC and ARC compliant and set up accord-
ingly. When correctly set up, you can use your TV
remote control to adjust the volume output (VOL +/-
and MUTE) of the sound bar.
Connect the HDMI cable (not included) from unit's
7
HDMI (ARC) socket to the HDMI (ARC) socket on
your ARC compliant TV. Then press the remote con-
trol to select HDMI ARC mode.
Note:
Your TV must support the HDMI-CEC and ARC and
7
the HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may dier
7
depending on the TV. For details about ARC func-
tion, please refer to the owner's manual.
Ensure that you use an HDMI cables that can sup-
7
port the ARC function.
HDMI-CEC will be called dierent names by dierent
7
manufacturers – please refer to your owner's manual
for details on setting up HDMI-CEC and ARC.
Use­the­OPtICaL­Socket
Remove the protective cap of the OPTICAL socket,
7
then connect an OPTICAL cable (included) to the
TV's OPTICAL OUT socket and the OPTICAL socket
on the unit.
Tip: While in HDMI ARC, OPTICAL mode, if there's
no sound output from the unit and the status indica-
tor flashes quickly, you may need to activate PCM
signal output on your source device (eg. TV, DVD or
Blu-ray player).
Use­the­aUX­Socket
a. Use a 3.5mm to 3.5mm audio cable (included) to
connect the TV's or external audio device head-
phone socket to the AUX socket on the unit.
26­
ENGLISH
HDMI ARC
OPTICAL USB AUX
HDMI ARC
OPTICAL USB AUX
HDMI ARC
OPTICAL USB AUX
A
B