Cleaning - Silvercrest SBP 1960 A1 Bedienungsanleitung Und Sicherheitshinweise

The appliance starts the drying process. During operation, the LEDs
one after the other, indicating the remaining drying time.
Fig. 2: Appliance in operation
NOTE
► Once the nylon balloon
straight again and smooth it out.
► You can adjust the drying time as required during operation.
► To stop the drying process prematurely and to switch off the appliance,
turn the dial
The appliance switches itself off automatically after the set drying time has
elapsed.
Remove the garment carefully.
Disconnect the power plug and allow the appliance and accessories to cool
completely before cleaning or storing them.

Cleaning

WARNING! RISK OF INJURY!
► Before cleaning the appliance, always remove the plug from the socket and
allow the appliance to cool down completely.
► Never immerse the appliance base
water or other liquids!
CAUTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. These can
irreparably damage the surface.
Allow the appliance and accessories to cool completely.
SBP 1960 A1
is completely inflated, pull the garment
anticlockwise until all the LEDs
, the mains cable or the mains plug in
go out
have gone out.
GB │ MT │
59 ■