LG BNU-LW Montageanleitung Seite 27

9) Ventilation function command (Only applies to ventilation product)
Function
Input Using NV
Operation
Function
Output Using NV
Operation
Valid Range
NV
SNVT_count
value
( Index : 8 )
10) Total operation/stop air conditioner indoor unit
Function
Input Using NV
Operation
11) Total operation/stop ventilation indoor unit
Function
Input Using NV
Operation
Valid Range
NV
value
SNVT_switch
( Index : 95 )
Default Value
It controls the product function of each ventilation product.
It monitors the function status of each ventilation product.
Filed
Network input variable : SNVT_switch nviTotalONOFF_indoor
Network input variable : SNVT_switch nviTotalONOFF_indoor
Filed
state
Ventilation user operating mode input
Network input variable : SNVT_count nviUser_n
Ventilation user operating mode status
Network output variable : SNVT_count nvoUser_n
Operation
0 = Not used
1 = Quick mode
2 = Power save mode
3 = Heat
Total stop command input
It turns ON or OFF all the indoor units.
Total stop command input
It turns ON or OFF all the ventilation units.
Operation
not used
1 = All ON indoor/Vent unit
0 = All OFF indoor/Vent unit
Appendix
Installation Manual 27