Description Of The Camera; Specification; Maintenance - Velleman CAMSET5N Bedienungsanleitung

3. Description of the Camera

Fig. 2
N°

Specification

1 lens
2 signal plug
3 sunshade
4 IR LEDs
5 adjusting screws
6 microphone
7 mounting bracket
Important Remark
The ON/OFF switch has no function when the reversing system is activated. If the blue wire is connected, then the
system is activated automatically when the car is put into reverse. The monitor is automatically deactivated as soon
as the car is no longer in reverse.

4. Maintenance

• Keep this device away from heat sources
• Protect this device against high humidity
• Wipe the housing clean with a dry cloth and do not use corrosives
• Keep the device away from speakers, TV's, etc. as this type of device generates a magnetic field that would
influence the picture of your monitor.
• Do not subject the device to severe shock
5. Monitor and Camera Installation
Use the mounting supports as a stand or a suspension beam (see below).
CAMSET5N
generates the images you see on the monitor
for signal transmission
protection against the rays of the sun
provides visibility at night
determine the camera angle
use of the audio function
keeps the camera in place
Fig. 3
- 2 -
Function
VELLEMAN