Operation
Switching on and off
Switching on:
♦
First, press the trigger lock
switch the tool on .
Switching off:
♦
Release the trigger
♦
When you have finished working, disconnect the appliance from
the compressed-air source .
Maintenance, cleaning and storage
WARNING! RISK OF INJURY! Disconnect the
appliance from the compressed-air supply.
CAUTION!
►
Before maintenance, clean off any hazardous substances that
may (due to working processes) have accumulated on the
appliance . Avoid all skin contact with these substances . If the
skin comes into contact with hazardous dusts, this can lead
to severe dermatitis . If dust is produced or swirled up during
maintenance, it can be inhaled .
NOTE
To ensure correct functioning and long-term durability of the appli-
ance, pay attention to the following points:
■
Sufficient and continuously intact oil lubrication is highly impor-
tant for optimum functioning .
PDKS 6.3 B3
forwards and then the trigger
.
GB │ MT
│
71
to
■