Layout And Items Supplied - EINHELL BT-KF 150 Originalbetriebsanleitung

• Always disconnect the machine by removing the plug from the socket, not by
pulling on the power cable.
•
Keep your workplace clean and well illuminated.
• Make sure that the workpiece is sufficiently secured so that it cannot slip.
• Keep children away.
• For your own sake, keep the equipment clean at all times and check it for signs
of damage each time after using it.
•
Make sure that the switch is set to OFF before you connect up the tool.
• Make sure of your footing, particularly when working on ladders and platforms.
• Harmful or toxic dust can be produced when working on wood or metal.
• Touching or inhaling this dust can be harmful for the operator and other persons
nearby.
•
To protect your health, always wear safety goggles and a dust mask during san-
ding/grinding work!
• If you discover any damage to the machine, use the exploded diagram and the
spare parts list to determine which parts need to be ordered from Customer
Service.
•
Only use cutters which have the correct shaft diameter and are suitable for the
working speed of the electric equipment.
• Important! Wear safety goggles and a dust mask.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1-2)
1. Lockable ON switch
2 Infi nitely adjustable speed controller
3 Power cable
4 ON/OFF switch
5 Thumb setting screw
6 Extractor port
7 Soleplate
8 Clamp
9 Thumb screw (soleplate)
10 Clamp nut
11 Spindle locking button
12 Ventilation slits
13 Swivel lock
14 Open-ended wrench
15 Circular/parallel cutting attachment
16 Grinding belts
Anl_BT_KF_150_SPK7.indb 27 Anl_BT_KF_150_SPK7.indb 27
GB
- 27 -
23.06.2016 09:28:59 23.06.2016 09:28:59