Reference Data For Installation; Current Consumption And Inrush Current; Storage Capacity For Recorded Data; Installation - Sony IPELA NSRE-S200 Installationsanleitung

Reference Data for

Installation

Current Consumption and Inrush
Current
Model AC input
voltage
100 V
NSRE-S200
220 V
Storage Capacity for Recorded
Data
You can confirm the configurations and the hard disk
drive capacity of the NSRE-S200
[Information] in the NSR-1000 series logon screen, and
viewing the Information screen that appears. You can
also confirm the actual storage capacity
can be recorded in the [Storage] tab of the Server screen.
For details on how to confirm, refer to the Installation
Manual for the NSR-1000 series.
1) Capacities for hard disk drives are approximations based on
the following equation for 1 GB: 1,000 × 1,000 × 1,000 =
1,000,000,000 bytes
2) Storage capacities are approximations based on the
following equation for 1 GB: 1,024 × 1,024 × 1,024 =
1,073,740,000 bytes
8
Reference Data for Installation / Installation
Full loading Inrush
current
0.8 A
13 A
0.4 A
1)
by clicking
2)
to which data
Installation
Before setting up, be sure that the location for
installation provides sufficient space and strength to
support the unit.
This unit weighs approx. 12 kg (26.7 lb.). The
dimensions for the unit are as follows.
16.9 in.
(430 mm)
Top
16.9 in. (430 mm)
When the front bezel is closed
16.4 in. (417 mm)
1.6 in. (40 mm) 14.8 in. (377 mm)
3.4 in.
(87 mm)
16.4 in.
(417 mm)