Sony PDBK-201 Bedienungsanleitung Seite 9

P3 AUDIO page
Item Setting
F1: A3 INPUT Selects the audio input signal to assign to
audio channel 3.
SDI: Audio signal embedded into SDI signal
ANALOG1: Analog 1 audio signal
AES/EBU: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
i.LINK: i.LINK signal
F2: A4 INPUT Selects the audio input signal to assign to
audio channel 4.
SDI: Audio signal embedded into SDI signal
ANALOG2: Analog 2 audio signal
AES/EBU: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
i.LINK: i.LINK signal
Note
When F1: V INPUT in the P1 VIDEO page of the function
menu is set to "i.LINK", A1 INPUT to A4 INPUT on the
P2 AUDIO/P3 AUDIO page are also set to "i.LINK".
Additional Setup Menu
Items
When this board is installed in the PDW-HD1500/F1600,
the menu items shown in the following table appear in the
setup menu.
In the "Settings" column of the table, the factory default
setting is underlined.
Refer to Chapter 7 "Menus" in the PDW-HD1500/F1600
Operation Manual for more information about setup menu
operations.
Item Item name Settings
number
215 i.LINK Select the connection method for
MODE
the
FAM (PC REMOTE): FAM
TS: TS connection
831 TS OUT 2ch: Output in 2-channel mode
AUDIO 4ch: Output in 4-channel mode
MODE
(i.Link) S400 connector.
connection
Additional Setup Menu Items
9