Sony CDX-DAB500U Bedienungsanleitung Seite 9

Scanning stops when the unit receives a
service/ensemble. Search until the
desired service is received.
Storing a service manually
1
While receiving the service that you
want to store, press and hold a number
button ( to ) until "MEM"
appears.
Receiving stored services
1
After selecting the desired band, press a
number button ( to ).
Searching for a service by
name — Quick-BrowZer™
You can display a list of services for easy
searching.
1
During DAB reception, press
(BROWSE).
The unit enters Quick-BrowZer mode,
and the list of services appears.
2
Rotate the control dial to select the
desired service, then press it.
Reception starts.
To exit Quick-BrowZer mode, press
(BROWSE).
Setting DAB announcements
Specific types of DAB announcements that
you set can interrupt the currently selected
source.
1 During DAB reception, press ,
rotate the control dial until
"GENERAL" appears, then press it.
2
Rotate the control dial until
"ANNOUNCE" appears, then press it.
3
Rotate the control dial until the desired
type of announcement appears, then
press it.
4
Rotate the control dial to select "ON"
or "OFF," then press it.
Notes
• The DAB announcement feature is available
when turned to other than the MW/LW bands.
• During a DAB announcement, the volume is
adjusted to the level set for TA in RDS
(page 11).
Type of announcement
ALARM (Alarm), TRAFFIC (Road Traffic
Flash), TRAVEL (Transport Flash),
WARNING (Warning/Service), NEWS
(News Flash), WEATHER (Area Weather
Flash), EVENT (Event Announcement),
SPECIAL (Special Event), RAD_INFO
(Program Information), SPORTS (Sport
Report), FINANCE (Financial Report)
Listening to the same program even
during weak reception
Set "FM LINK" to "ON" (page 21).
"FM-LINK" lights up when the
corresponding FM program is being
received.
Updating the service list
automatically — Auto scan
Press  repeatedly until
1
"TUNER" appears.
2 Press  repeatedly to select
"DAB1," "DAB2" or "DAB3."
3 Press , rotate the control dial
until "GENERAL" appears, then press
it.
4
Rotate the control dial until
"AUTOSCAN" appears, then press it.
9