Husqvarna 27007994244 Bedienungsanleitung Seite 56

5 MOUNTING FOR ADDITIONAL FUEL TANK
20
–
Position center section
fuel tank assembly kit scope of supply) with the brackets.
Info
If necessary, remove two outer hose sections
the center section beforehand.
–
Mount and tighten original screws
Guideline
Screw, bottom
radiator bracket
–
Tighten screws
Guideline
Screw, upper radia-
tor bracket
–
Secure the fuel hose to the radiator hose with cable ties.
500772-01
–
Position tank distance piece
bly kit scope of supply) on both sides of the frame as shown
and secure with cable ties.
500773-01
–
Mount right fastening strut
(both additional fuel tank brackets scope of supply) with
dt
screws (additional fuel tank assembly kit scope of
supply), but do not tighten yet.
Info
The fastening struts are marked R and L.
–
Mount and tighten screw
500774-01 kit scope of supply).
Guideline
Screw, fastening
strut right
–
Mount and tighten screws
kit scope of supply).
Guideline
Screw, fastening
strut left
B
of short fuel hose
ht ik
and
M6 8 Nm (5.9 lbf ft)
il
.
M6 10 Nm (7.4 lbf ft)
br
(additional fuel tank assem-
fm
and left fastening strut
el
(additional fuel tank assembly
M5x16 10 Nm (7.4 lbf ft)
dt
(additional fuel tank assembly
M6x16 10 Nm (7.4 lbf ft)
bo
(additional
C
from
.
fl